一、安装supervisor

1.使用yum安装

$ yum install epel-release        # 安装epel
$ yum install -y supervisor       # 安装supervisor
$ systemctl enable supervisord    # 开机自启动
$ systemctl start supervisord     # 启动supervisord服务$
$ systemctl status supervisord    # 查看supervisord服务状态

2.pip安装（不推荐）

$ wget https://bootstrap.pypa.io/pip/2.7/get-pip.py  #下载PIP
$ python get-pip.py #安装PIP


$ pip2 install supervisor
# 可能遇到的问题及解决办法：
# 如果遇到NameError: name ‘sys_platform’ is not defined
# 运行如下命令即可（但是也会报错，不用理会）
$ pip2 install –upgrade distribute,
# 然后再卸载supervisor，
$ pip2 uninstall supervisor，
# 重装supervisor,
$ pip2 install supervisor。
#参考http://www.yuchaoshui.com/post/CentOS6-Python-installation

创建supervisor所需目录及配置文件

$ mkdir /etc/supervisord.d/
$ echo_supervisord_conf > /etc/supervisord.conf

二、配置文件

; Sample supervisor config file.
[unix_http_server]
file=/var/run/supervisor/supervisor.sock   ; (the path to the socket file)
;chmod=0700                 ; sockef file mode (default 0700)
;chown=nobody:nogroup       ; socket file uid:gid owner
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))
[inet_http_server]         ; inet (TCP) server disabled by default   如果不需要开启http管理就把这行注释掉
port=0.0.0.0:9001          ; (ip_address:port specifier, *:port for all iface)  http管理地址及端口
username=user              ; (default is no username (open server))             http管理用户名
password=123               ; (default is no password (open server))             http管理密码
[supervisord]
logfile=/var/log/supervisor/supervisord.log  ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10          ; (num of main logfile rotation backups;default 10)
loglevel=info               ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false              ; (start in foreground if true;default false)
minfds=1024                 ; (min. avail startup file descriptors;default 1024)
minprocs=200                ; (min. avail process descriptors;default 200)
;umask=022                  ; (process file creation umask;default 022)
;user=chrism                 ; (default is current user, required if root)
;identifier=supervisor       ; (supervisord identifier, default is ‘supervisor’)
;directory=/tmp              ; (default is not to cd during start)
;nocleanup=true              ; (don’t clean up tempfiles at start;default false)
;childlogdir=/tmp            ; (‘AUTO’ child log dir, default $TEMP)
;environment=KEY=value       ; (key value pairs to add to environment)
;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)
; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
[supervisorctl]
serverurl=unix:///var/run/supervisor/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default “supervisor”)
;history_file=~/.sc_history  ; use readline history if available
; The below sample program section shows all possible program subsection values,
; create one or more ‘real’ program: sections to be able to control them under
; supervisor.
;[program:theprogramname]
;command=/bin/cat              ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=999                  ; the relative start priority (default 999)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=true              ; retstart at unexpected quit (default: true)
;startsecs=10                  ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; ‘expected’ exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB   ; number of bytes in ‘capturemode’ (default 0)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB   ; number of bytes in ‘capturemode’ (default 0)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A=1,B=2           ; process environment additions (def no adds)
;serverurl=AUTO                ; override serverurl computation (childutils)
; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more ‘real’
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.
;[eventlistener:theeventlistenername]
;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;events=EVENT                  ; event notif. types to subscribe to (req’d)
;buffer_size=10                ; event buffer queue size (default 10)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=-1                   ; the relative start priority (default -1)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=unexpected        ; restart at unexpected quit (default: unexpected)
;startsecs=10                  ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; ‘expected’ exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups        ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A=1,B=2           ; process environment additions
;serverurl=AUTO                ; override serverurl computation (childutils)
; The below sample group section shows all possible group values,
; create one or more ‘real’ group: sections to create “heterogeneous”
; process groups.
;[group:thegroupname]
;programs=progname1,progname2  ; each refers to ‘x’ in [program:x] definitions
;priority=999                  ; the relative start priority (default 999)
; The [include] section can just contain the “files” setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.
[include]
files = supervisord.d/*.conf  ;子配置文件，一般用于子进程

我比较喜欢使用.conf文件，在最后一行把*.ini改成*.conf即可

三、进程守护

# 创建配置文件
$ vim /etc/supervisord.d/test.conf
# 文件内容

#项目名
[program:blog]
#脚本目录
directory=/opt/bin
#脚本执行命令
command=/usr/bin/python /opt/bin/test.py
#supervisor启动的时候是否随着同时启动，默认True
autostart=true
#当程序exit的时候，这个program不会自动重启,默认unexpected，设置子进程挂掉后自动重启的情况，有三个选项，false,unexpected和true。如果为false的时候，无论什么情况下，都不会被重新启动，如果为unexpected，只有当进程的退出码不在下面的exitcodes里面定义的
autorestart=false
#这个选项是子进程启动多少秒之后，此时状态如果是running，则我们认为启动成功了。默认值为1
startsecs=1
#脚本运行的用户身份
user = test
#日志输出
stderr_logfile=/tmp/blog_stderr.log
stdout_logfile=/tmp/blog_stdout.log
#把stderr重定向到stdout，默认 false
redirect_stderr = true
#stdout日志文件大小，默认 50MB
stdout_logfile_maxbytes = 20MB
#stdout日志文件备份数
stdout_logfile_backups = 20

四、命令

supervisorctl status        //查看所有进程的状态
supervisorctl stop es       //停止es
supervisorctl start es      //启动es
supervisorctl restart       //重启es
supervisorctl update        //配置文件修改后使用该命令加载新的配置
supervisorctl reload        //重新启动配置中的所有程序

五、开机启动

1.yum安装

# systemctl enable supervisord # 开机自启动
 
# 其他

# systemctl start supervisord # 启动supervisord服务
# systemctl status supervisord # 查看supervisord服务状态

# ps -ef|grep supervisord # 查看是否存在supervisord进程

2.PIP安装

vim /etc/rc.local
# 最后增加一行

supervisorctl -c /etc/supervisord.conf 

# 设置执行权限：
chmod 755 /etc/rc.local